4 SEASONS High Gloss Enamel

It is a top quality alkyd gloss finish especially developed to with stand the most severe condition of tropical climate. It is made from long oil alkyd and light fasted pigments. This enamel has excellent gloss retention and resistance to fungus attack.

Type : Alkyd Enamel for Decorative
Color : Please refer 4 Seasons catalog

✔ REFERENCE STANDARD : TIS 327-2553(2010), TIS 2625-2557(2014)

Longer gloss retention, Durable for every climate
● Special alkyd resin combined with Super High Gloss Technology to make color film high adhesive and deeply penetrate to surface.
● None added mercury and lead 100%. No harm for healthy and environmental-friendly.

Safe for users
It is most suitable for the application of woods,metal,both exterior and interior.It is also ideal for the uses as marine enamel, heavy machineries, bridges, towers, trucks, tractors, public transport vehicles etc. Where toughness and durability are of primer importance.

Application Tool:
Tools : Roller, Brush, Spray
Thinner No. : TOA Thinner No.23, TOA Thinner No.21
Dilution (%) : 10 -15 %

Theoretical coverage : 13 m2 / liter / coat, & 50 m2 / gallon / coat.
Remark : Actual Surface coverage will depend on surface irregularities, Mixing, Application Condition method and technique; as well as the structure and dimensions of the object to be coated.

Surface Preparation
New surface (Steel) : Steel substrate must be prepared ,free from rust,millscale,dirt,loose particles,and waxy contaminate.
New surface (Wood) : Wood substrate must be prepared, free from dirt, loose particles, and waxy contaminate.
Old surface (Steel) : Polishing the paint film peeling out and clean the dust, rust and grease-free.
Old surface (Wood) : Polishing the paint film peeling out, clean the dust & grease-free.

Coating system
Primer Steel : 4 SEASONS RED OXIDE PRIMER 1-2 coat. (40 µ per coat).
Primer Alloy : Apply 1 coat TOA Wash Primer for galvanized steel and aluminium alloy surface,
        (10 µ per coat).
        4 SEASONS RED OXIDE PRIMER 1-2 coat, (40 µ per coat).
Wood : 4 Season Wood Primer (F-1600) or TOA Aluminium Wood Primer (G-1601) is required
     for new resinous wood, (40 µ per coat).
Topcoat : Apply 4 Season Enamel gloss 2 coat (30 µ per coat).

Recommendation : The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

Storage condition : The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.
Containers must be kept tightly closed.
Shelf life : 60 months at 30 ํC

The information in this data sheet is given to the best of our knowledge based on laboratory testing and practical experience. However, as the product is often used under conditions beyond our control, we cannot guarantee anything only the quality of the product itself. We reserve the right to change the given data without notice.




Interior and Exterior

Product Types


Film Type



1/4 GL., 1 GL.





Our Products