WIN Acrylic Lacquer Spray For Motorcycle

WIN Motorcycle Spray or WIN Candy Tone Spray is based on high quality nitrocellulose, modified alkyd resin and special pigments that gives the colorful candy tone finish. The properties of this product are fast dry, high gloss and good adhesion on plastic, metal and wood which have been primed with suitable primer.

● Formulated by high quality acrylic lacquer.
● Used for exterior and Interior.
● Durability, quick drying and good adhesion.
● Quick dry & Color long lasting.

Type : Nitrocellulose and Modified Alkyd Resin.
Color : Wide range of colors. Please ask for catalog.

WIN Motorcycle Spray is suitable for auto parts, bicycle, motorcycle, furniture, plastic model, toy, souvenir and etc.

● Surfaces should be clean, dry and free from oil, grease and rust before spraying.
● Shake can thoroughly until consistent sound of peas (2 minutes) before used and while spraying should shake can periodically.
● 2 coats for excellent color uniformity. (hold can approximately 1 foot from object to be sprayed, thin spraying for the first coat and let it dry for 10 minutes, then spray the second coat).
Primer : Apply suitable primer for desired surface or apply with WIN Primer Surfacer Grey Spray #266 at least 2 coats to enhance adhesion.
Top Coat:
1. Before use, shake the can of WIN Motorcycle Spray thoughly around 2 minutes and shake periodically during spray.
2. Spray with distance from the required object around 20 – 25 cm and spray from left to right and top to bottom of the object.(Depend on skill and experience).
3. The first coat must be thin and allow to dry at least 10 minutes before spray the second coat.

Condition During Application:
● Use respiratory mask with charcoal and dust filter. For prolonged or repeated handling, use nitrile gloves or polyvinyl alcohol gloves.
● Use safety eye wear designed to protect against splash of liquids.
● No smoking.

Safety precautions:
● Do not apply near flames.
● Do not store at temperature more than 40 °C.
● Ensure good ventilation during application and drying.
● When used it up, do not burn the can or throw it into fireplace.

● The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.
● After used, the container must be kept tightly closed.

36 months at 25 – 30 ํC (from manufacturing date).

This information in this data sheet is given to the best of our knowledge based on laboratory testing and practical experience. However, as the product is often used under conditions beyond our control, we cannot guarantee anything only the quality of the product itself. We reserve the right to change the given data without notice.




Interior and Exterior

Product Types


Film Type



400 cc / Can



Our Products